Danfoss CAS thermostats are temperature-controlled switches. The position of the contacts depends on the temperature of the sensor and the set scale value. In this series, special attention has been given to meeting demands for a high level of enclosure, robust and compact construction, and resistance to shock and vibration.
The CAS series covers most outdoor as well as indoor application requirements.
CAS thermostats are suitable for use in monitoring and alarm systems in factories, diesel plant, compressors, power stations and on board ship.
Danfoss CAS thermostat
• Temperature ranges: 20°C to 150°C
• Low differential (fixed) micro switch
• Enclosure IP67. Sturdy and sea water resistant
• Robust and compact construction
• Resistance to shock and vibrations
• Available with all relevant land and marine approvals
• Available as 2-step thermostats (see CAS 2-step)
Micro switch with single pole changeover (SPDT) Contact load
Alternating current: 220 V, ~0,1 A, AC-14 and AC-15 (inductive load)
Direct current 125 V, 12W DC-13 (inductive load)
Ambient temperature CAS 178,180 and 181: -25°C → +70°C
Vibration-stable in the range 2-30 Hz, amplitude 1,1 mm and 30-100 Hz, 4 G.
IP 67 acc. to IEC 529 and DIN 40050.
The thermostat housing is enamelled pressure die cast aluminium (GD-AISI 12). The cover is fastened by four screws which are anchored to prevent loss.
The enclosure can be sealed with fuse wire.
Cable entry Pg 13.5 for cable diameters from 5 to 14 mm.
Identification The type designation and code no. of the unit is stamped in the side of the housing.
CE marked acc. to EN 60947-5-1
CCC, China Compulsory Certificate
American Bureau of Shipping, USA
Bureau Veritas, France
Det Norske Veritas, Norway
Germanischer Lloyd, Germany
Lloyd Register of Shipping, UK
Nippon Kaiji Kyokai, Japan
Registro Italiano Navale, Italy
RMRS, Maritime Register of Shipping, Russia